2001 Super Duty F250 F350 Excursion NEW OEM Ford Cab Light set with Install Kit

Description

This Auction includes 5 Brand new OEM Ford Super Duty cab lights also called running lights or called Clearance lights, with a 5 plug OEM Ford factory wiring harness, bulbs, and installation hardware for 2001 Ford Super Duty F250 F350 F450 F550 F650 F750 and Excursion
This Kit will also include an exact template for you to use to mark and drill the holes, so you don’t make any mistakes drilling the holes during the install...
We will also include a spring-loaded center punch to make sure all your holes are in the exact correct spot. We will also have the exact size of the drill bits required written on the template and basic instructions written on the template.
This is a complete set, ready to install....
Electrical hook up is Very easy. Most of these (99-07) trucks already have the plug that these plug into behind the passenger side kick panel. This harness runs up the passenger side pillar, just plug into the existing connector if your truck is equipped for lights. If your vehicle does not directly plug in you can cut off the electrical plug and hook up the black wire to any metal support in the roof for ground or you can run both wires down to kick panel area, and run the other brown wire to your parking light circuit so that they only come on when your lights are on.
******** We give you an accurate metal template to drill the 15 holes needed to install all the lights correctly. ( 3 holes per light)  We see other sellers offering direction or instructions but directions are worthless alone without an exact drilling template to use.
You can be sure that you project will go as planned by knowing you will not drill a hole in the wrong location during the install. Miss drilling a hole in the wrong place can cause a leak and damage your headliner or you may need costly bodywork to repair the mistake.
You can also install these on most ford pickups vans and utility trucks, Ford Explorer, Ford Bronco, Ford Excursion, Ford Expedition and Lincoln Navigator, you will have to splice into the running light circuit to provide power for them.