Frosted Privacy Adhesive Glass Window PVC Sticker Decorative Film Home Office

Description

Frosted Privacy Decorative Window Film
Note: If you are ordering multiple quantities, we will ship each roll in the listed size and ordered quantity. For example, if you order 3 qty, we will ship 3 pieces of the selected size.
Size: Please select the size above
Description:
This translucent window film mimics the look of specialty glass and provides privacy while still transmitting natural light into the room. The film is perfect for office, kitchen, bedroom, bathroom, sliding doors and more; it works on smooth glass surface with no textures / cracks or etc.
Installation:
1.
Clean the window thoroughly including dirt, grease and etc which the film is to be applied.
2.
Measure the surface you are applying and cut the film so they measure about 3/4" larger than the window being covered
3.
Make your own soapy water solution into a spray bottle, add few drops of baby shampoo or mild detergent and mix with water. This shall allow the film to be reposition while aligning to the surface.
4.
Spray the soapy water solution onto the area being covered. Remove the release liner on the film and spray the adhesive-side of the film with soapy water. Then place the film onto the window and align to the area being covered.
5.
Use a squeegee or credit card to push out all the water and bubbles starting from the center and towards the edges. Make sure all the water and bubbles are completely removed. It may take several days for the film to be completely dry and cured.
6.
Trim the excess film with a sharp utility knife and wipe away any excess water especially on the edges. And you are done!