Mirror Reflective One Way Privacy Window Film - Sticky Back Glass DIY Tint glass

Description

Silver, Blue, Bronze, Green | 50cm, 75cm, 100cm, 152cm
Shop Home
Pre Cut Window Tint (Rear)
Pre Cut Window Tint (Front)
Pre Cut Window Tint (Full)
Window Tinting Tools
Window Tint Rolls
Mirror Reflective One Way Privacy Window Film
Shop categories
Pre Cut Window Tint (
Rear
)
Pre Cut Window Tint (
Front
)
Pre Cut Window Tint (
Full
)
Window Tinting Tools
Window Tint Rolls
Car Wrap/Vinyl
Decorative Window Film
Recommended accessories
Felt edge squeegee
Tint Slime - Window tint solution
Sun strip
Item Details
-
Available in silver, blue, bronze and green. The coloured side will be on the outside of the glass once applied, with the inside always being silver
- Bubble free technology
- Can be installed on household Windows or for decorative purposes e.g. internal doors
-
The film is a reflective film and will reduce glare from the sun, as well as reflecting heat, so the room is kept cooler in the summer and warmer in the winter
-
The film also gives excellent privacy by acting as a mirror when viewed from outside during the day. (At night this effect will be reversed so people will be able to see in)
- We supply a variety of sizes to suit your requirements
- Clear instructions are included with the item
- World renowned WT Window Films brand
-
All our window films are self-adhesive film, and are suitable for use in your homes, cars, shops, offices
and building Windows
- Mirrored film for glass
Window Film Installation Instructions
You will need:
- Roll of window film
- Scissors/cutting knife
- Tape measure
- Spray bottle containing water with a few drops of washing up liquid
- Squeegee or credit card wrapped in kitchen towel
Method:
1) Thoroughly clean the window the film will be applied to.
2) Cut your film to size of the window, adding an extra 2cm to the width and height.
3) Remove the clear lining film from back of the window film and spray the adhesive back of the film, as well as your fingers, with the soapy water solution. (
Tip:
If you cannot remove the clear lining film, attach a piece of sticky tape to either side of the film at one corner and peel away from each other).
4) Spray the glass with the soapy water
5) Apply the adhesive side of the film onto the glass and slide into position
6) Spray the face of the film with the soapy water and using a squeegee or credit card wrapped in paper towel, squeegee out all the soapy water from behind the film
7) Trim off any excess film using a sharp knife for a neat finish
Over 20,000 kits sold
"So easy to fit, thanks Window-Tint!" - D. Willis
"Got my Windows tinted using the pre cuts, looks great and easy to apply." - P. Alves
"Window tints on our Volvo XC90 look awesome, pre-cut tints were easy to work with." - A. French
About Us
Based near Chester and established over 10 years ago, we are one of the UK's leading suppliers of window tints and PPF to professional and DIY users.
All of our window tint and PPF is carefully sourced to make sure you are getting the best product that is easy to install and is of a high quality.
We can offer expert advice on fitting or using any of our products.
- The film is a reflective film and will reduce glare from the sun, as well as reflecting heat, so the room is kept cooler in the summer and warmer in the winter - The film also gives excellent privacy by acting as a mirror when viewed from outside during the day. (At night this effect will be reversed so people will be able to see in) 3) Remove the clear lining film from back of the window film and spray the adhesive back of the film, as well as your fingers, with the soapy water solution. (Tip: If you cannot remove the clear lining film, attach a piece of sticky tape to either side of the film at one corner and peel away from each other). 6) Spray the face of the film with the soapy water and using a squeegee or credit card wrapped in paper towel, squeegee out all the soapy water from be